Nice unit & kit
Read more

Not the easiest thing to install if you've never done it before. But once it's up boy is it sturdy. This was a third of the price of ones sold by high street building and hardware stores so it was definitely good value for money. It makes a feature out of a door when you use the barn door roller system . It doesn't squeak at all and comes with two stoppers for the top of the rolling track to stop ut falling off the edge. I did have to paint the bolts with a bit of black iron paint as having to tighten them took some of the finish off. Overall it's such a beautiful addition to a room and saves so much space when not having to have a conventional door open.
Read more

The kit is very sturdy, and has all the important bits. Even if it's cheap compared to alternatives, it works and is a good solution. We're really happy with the result, although the installing process was a bit annoying. Be extremely careful with the instructions. Most of it is ok, but regarding the holes to drill either on wood or wall installation, I would triple check and make your own decision. As you can see in my pictures, the wood mounting screws provided are 7.5mm. The manual instructs you to drill 8mm. If you do that, it will clearly be a clearance hole. It might bite at the tip of the screw if there's enough wood thickness (there wasn't in my case), but even then, I would still drill 7mm instead. To fix it we needed to oversize the holes to 10mm and then use rawl plugs in wood, which is not ideal. It worked though. For wall mounting holes (we had 2 on wood and 3 on wall), it's a similar story. Manual says 8mm holes. The metal anchors provided are 9.7mm. No idea how we were meant to fit those. Since my 8mm holes had become a bit loose, I still hammered the anchors in and it "worked". HOWEVER, when trying to mount the rail, the bolts would screw into the anchors initially, but then they became so tight that the anchors just started spinning. They were completely useless. We had to take everything out (which was a pain), move the rail down and redrill everything 15mm lower with new holes. This time I didn't use the anchors, and used my own standard rawl plugs with the wood screws provided. It worked much better. So again, be very careful of the instructions. Triple check, and make your own decisions. Also be careful and triple measure the door height. Apart from that, it's a great kit and the door slides nice and silent.
Read more

Fabulous looks great really easy to fit
Read more

Clear instructions.
Read more

The media could not be loaded. This is far far better quality than I expected for this price! It is really robust, very heavy duty and slides a heavy door really smoothly. The only downside is the floor bracket requires the door to have a groove. Also, make sure you fit the rails the correct way around. I saw other reviews saying they were lumpy, but this is because all rails need to be the correct way around.
Read more

Absolutely brilliant quality. Very strong and smooth running.
Read more

It’s useful for a small space, but a little wobbly - but for what I need it’ll do nicely !
Read more